MTK SDK WiFi modes(ADHOC)


Just find some instruction to use the mt7628 driver by iwpriv, this still need work to make it work with uci system, but at least if you are using latest vocore2 wifi driver, you can start adhoc mode by iwpriv.

a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption)
       1. iwpriv ra0 set NetworkType=Infra
       2. iwpriv ra0 set AuthMode=OPEN
       3. iwpriv ra0 set EncrypType=NONE
       4. iwpriv ra0 set SSID=”AP’s SSID”

b> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption)
       1. iwpriv ra0 set NetworkType=Infra
       2. iwpriv ra0 set AuthMode=SHARED
       3. iwpriv ra0 set EncrypType=WEP
       4. iwpriv ra0 set DefaultKeyID=1
       5. iwpriv ra0 set Key1=”AP’s wep key”
       6. iwpriv ra0 set SSID=”AP’s SSID”

c> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption)
       1. iwpriv ra0 set NetworkType=Infra
       2. iwpriv ra0 set AuthMode=WPAPSK
       3. iwpriv ra0 set EncrypType=TKIP
       4. iwpriv ra0 set SSID=”AP’s SSID”
       5. iwpriv ra0 set WPAPSK=”AP’s wpa-preshared key”
       6. iwpriv ra0 set SSID=”AP’s SSID”

d> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption)
       1. iwpriv ra0 set NetworkType=Infra
       2. iwpriv ra0 set AuthMode=WPAPSK
       3. iwpriv ra0 set EncrypType=AES
       4. iwpriv ra0 set SSID=”AP’s SSID”
       5. iwpriv ra0 set WPAPSK=”AP’s wpa-preshared key”
       6. iwpriv ra0 set SSID=”AP’s SSID”

e> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption)
       1. iwpriv ra0 set NetworkType=Infra
       2. iwpriv ra0 set AuthMode=WPA2PSK
       3. iwpriv ra0 set EncrypType=TKIP
       4. iwpriv ra0 set SSID=”AP’s SSID”
       5. iwpriv ra0 set WPAPSK=12345678
       6. iwpriv ra0 set SSID=”AP’s SSID”

f> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption)
       1. iwpriv ra0 set NetworkType=Adhoc
       2. iwpriv ra0 set AuthMode=OPEN
       3. iwpriv ra0 set EncrypType=NONE
       4. iwpriv ra0 set SSID=”Adhoc’s SSID”

g>  Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption)
   1. iwpriv ra0 set NetworkType=Adhoc
       2. iwpriv ra0 set AuthMode=WPANONE
       3. iwpriv ra0 set EncrypType=TKIP
       4. iwpriv ra0 set SSID=”AP’s SSID”
       5. iwpriv ra0 set WPAPSK=12345678
       6. iwpriv ra0 set SSID=”AP’s SSID”



本文章由作者:佐须之男 整理编辑,原文地址: MTK SDK WiFi modes(ADHOC)
本站的文章和资源来自互联网或者站长的原创,按照 CC BY -NC -SA 3.0 CN协议发布和共享,转载或引用本站文章应遵循相同协议。如果有侵犯版权的资 源请尽快联系站长,我们会在24h内删除有争议的资源。欢迎大家多多交流,期待共同学习进步。

相关推荐